Commercial Wood Doors in Buffalo, NY

Architectural wood doors for the finished side of the building

Wood is the standard for commercial interiors. Offices, hotel corridors, medical suites and multifamily units almost always use solid-core wood doors, because they give a warm, finished appearance that steel cannot match while still meeting commercial durability and fire requirements.

We supply flush and glazed commercial wood doors in both paint grade and stain grade, hung in matching hollow metal or wood frames. Veneer options cover red oak, maple, cherry, birch and walnut, and high-pressure laminate is available where a surface has to survive daily cleaning and cart traffic.

Wood belongs inside. For exterior Buffalo entrances that take road salt, wind-driven snow and freeze-thaw cycles, we will steer you toward steel or aluminum storefront instead, and say so plainly rather than sell you the wrong product.

Selection Guide

Choosing the right commercial wood door

Paint grade or stain grade?

Paint grade costs less and hides imperfections, and it is the sensible choice for back-of-house corridors and utility rooms. Stain grade shows real wood grain and belongs anywhere clients or residents see the door. Mixing the two within a sightline is what makes a corridor look cheap.

Veneer matching across a run

If a corridor has eight doors in a row, they should look like one set. Veneer matching means the doors are cut from related material so grain and colour stay consistent. It costs more up front and is nearly impossible to retrofit later, so decide before ordering.

When to specify high-pressure laminate

Laminate faces survive disinfectant, scuffing and cart impact far better than veneer. For medical suites, schools and busy hospitality corridors, laminate usually outlasts wood veneer by years while still looking finished.

Fire ratings on wood doors

Rated wood doors use a mineral core and carry UL labels up to 90 minutes. That covers most interior corridor and stair applications. Openings requiring more than 90 minutes generally need a hollow metal assembly instead.

Do not field-modify a rated door

Cutting a rated wood door down or adding an unlisted lite kit voids the label. Order the door to the correct size and configuration from the start.

Check before you accept delivery

Confirm the label is present and legible when the door arrives. A missing label on site is far easier to resolve than one discovered at inspection.

Sound control in hotels and offices

STC-rated door constructions with proper seals and bottom closers make a measurable difference in hotel corridors and boardrooms. A high-STC door with no perimeter seal, however, performs no better than a standard one. The assembly has to be complete.